|
Amp * hour / Amp * min. Meter with Voltmeter |
|
General Specifications : |
| Accuracy |
± 0.2 % of FSD |
| No. of Digits |
4 Digit for Current & Voltage
7 Digit for Amp * hr/Amp* min. |
| Auxillary Supply |
230 V ± 10%@ 50 Hz. Burden<6VA |
| Size |
96mm x 96mm x 110mm (depth) |
| Operating Principle |
DSP with Micro-controller |
| Operating Temp. |
0° C to 60° C |
|
Features: |
- User selectable Shunt Current from 1A to 9999A in step of 1A
- User selectable Shunt mV upto 200mV in step of 1mV
- User selectable A *hr of A *min.mode
- User selectable A hr Max. settings is 999999.9Ahr and A * min. Max setting is 9999999. display indications and opto-isolated output available, if above setting limits exceeds.
- Data backup for A*hr/A*min during Power Failure. Data retention upto 10 years,
- Totaliser in A*hr. Can be read and cleared, if required.
- "O/R" indication for current and voltage, if reading exceeds 1% of FSD value
- Communications:Modbus Protocol (Optional).
- True RMS Current & Voltage. Ripple Current & Voltage.
|
Display
Options : |
- 2Line x 16 Character LCD Display with Back-lit. (User Friendly)
- 3Lines 7 Segment display
|
| Note: Some of the feature may vary slightly for different display option in all the above Meters Due to continuous development, specifications are subject to change without notice. |
Other Associated Products
-
Industrial Grade Single Phase and Three Phase Energy Meter conforming to IS 13779 & IEC 1036
- Single Phase and Three Phase Standard Energy Meter for Class:0.2% for Energy Meter testing
- Timers, Counters, Totalizers & Transducers
General Specifications
| Auxillary Voltage |
230v ± 10% @ 50Hz or optional |
| Power Consumption |
4.5 VA. |
| Operating Temperature |
0-60 ° C (RH < 95‰) |
| Over Range Indications |
`1' as MSD |
| Display |
14.2mm LED Red or Optinal Green. (25mm for 144 X 144mm) |
| CONFORMS TO |
QM 333 |
|
