Parameters:

• True RMS Current and Voltage, Watts, PF, VA & VAr for each channel
• Average Current, Voltage and PF
• Summation Watt, VA and VAr
• System Hz and Neutral Current

Optional:

1. Records Maximum Demand of I, V, kW, KVA and Minimum PF with time and date.
2. Gives opto-isolated output for Max. kVA and Min PF Settings.
3. Records Maximum kVA (Block Method) on selectable date.

1. +kWh, +kVArh, -kVArh & kVAh
2. LED Pulse Output for +kWh, +kVArh, -kVArh & kVAh(Selectable). Max. 3600 Pulse per hour.
3. Records kWh on Selectable date.

1. +kWh, -kWh, +kVArh * kVAh
2. LED Pulse Output for +kWh, -kWh, +kVArh, -kVArh & kVAh (Selectable). Max. 3600 Pulse per hour.
3. Records kWh on Selectable date.

1. Opto-isolated Modbus Protocol. Selectable Baud Rate.

   Accuracy	< ± 0.3 % of Full Scale Value for I, V, W, VAr, VA < ± 0.005 for PF. Range: OLag-1-0 Lead. ± 0.01Hz for Hz Range: 45.00 Hz to 65.00Hz ± 0.5% for Energy (IEC 1036 & IS 13779) ± 5% for in
   No. of Digits	4 Digit for I, V, Hz, PF, kW, kVA & kVAr 8 Digit for Energy
   Auxillary Supply	110 V or 230 V or 440V @ 50Hz ± 10% Burden<6VA
   Size	96mm x 96mm x 110
   Operating Principle	DSP with Micro-controller
   Operating Temp.	0° C to 60° C

• Auto range selection from Unit to Kilo or Kilo to Mega, as applicable
• Auto Scroll & Manual mode. Programmable scrolling time
• Phase Sequency Check for Voltage (for 3-Phase only)
• Programmable CT Primary rating from 5A to 9999A
• Programmable CT Secondary 1A or 5A
• Programmable PT ratio
• Energy Reset and Cumulative Energy Indication
• Password Protected Edit mode

1. Auxillary Voltage: 110V (or) 230V (or) 440V
2. Single Phase, 3Phase 2 Ele. 3Wire, 3Phase 3Ele. 4Wire
3. Maximum Demand Feature
4. Energy Measurement (Import)
5. Energy Measurement (Import/Export)
6. Communications: Modbus Protocol

1. 2Line x 16 Character LCD Display with Back-lit. (User Friendly)
2. 3Lines 7 Segment display
3. 1 Line x 8 Character large LCD Display with Back-lit for 3-Phase HT applications.